WINCH SWITCH – The Switch Masters

Momentary Rocker Switch Winch IN-OUT Symbol

GABRIEL ESPINAL — Mon, 04 Apr 2022 14:49:00 +0000

Momentary Rocker Switch Winch IN-OUT Symbol is a double throw momentary switch (returns to center position by the spring) designed to operate your 12 volt 4WD Winch. it has a face surface size of 2″ x 1″ (50mm x 25mm) and uses a standard din size mounting hole of .86″ x 1.46″ (22mm x 37mm). this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Double Pole Double Throw MOMENTARY switch
• Black hard surface rocker
• Twin upper and Single lower incandescent lights
• Upper lights are ON when the switch is pressed UP
• Lower light is ON when switch is pressed DOWN
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Momentary Rocker Switch Winch IN-OUT Symbol is a product of The Switch Masters

Momentary Push Switch for Toyota – IN-OUT Symbol

GABRIEL ESPINAL — Thu, 01 Aug 2019 16:25:00 +0000

Momentary Push Switch for Toyota – IN-OUT Symbol allows you to operate any 12 volt accessories, with short circuit protection, the Industries High Quality 12 volt Push Switch will give you a clean and original style look, they are install in the existing holes that come with the vehicle and it has a face surface size of 1.54″ x 0.83″ (39 mm x 21 mm).

This switches are made out of heavy duty ABS plastic that will ensure years of service and come in a mate black surface color, the same color as the OEM Switches, All symbols are Laser etched directly onto the switch face using modern high Tech laser engraving equipment to ensure long image life.

FEATURES:

• The product is manufactured to fit in the OEM space available in your car or truck, simple to install
• Single Pole Single Throw MOMENTARY Push switch
• Black hard surface rocker
• Laser etched Legend
• Single upper L.E.D light
• Single lower L.E.D light
• Upper light is ON when the switch is pressed IN
• Lower light can be wired to separate dash light circuit
• Rated at 3 Amp 12V
• Wiring diagram supplied with switch

The switch is an electronic switch rated at 3 amp’s. Therefore in ALL cases the accessory MUST be wired through a fused relay.

KIT CONTAINS:

• 2 Toyota MOMENTARY Push Switch
• 2 Connector with cable for easy installation

FITS THESE VEHICLES:

• Toyota FJ Cruiser 2007-ON
• Toyota Fortuner 2005-2014
• Toyota Hilux 2005-2014
• Toyota Tacoma 2005-2011
• Toyota Tacoma 2012-ON (Left Side ONLY)
• Toyota Highlander 2001-2007
• Toyota Tundra 2005-2006 (Center Console if equipped)
• Toyota 4Runner 2003-2009
• Toyota Prado 120 Series 2003-2009
• Toyota Land Cruiser 100 Series 1998-2007
• Toyota Land Cruiser 75, 76, 78 & 79 series

Momentary Push Switch for Toyota – IN-OUT Symbol is a Part of The Switch Masters

Momentary Push Switch for Toyota – Winch IN-OUT Symbol

GABRIEL ESPINAL — Thu, 01 Aug 2019 16:18:00 +0000

Momentary Push Switch for Toyota – Winch IN-OUT Symbol allows you to operate any 12 volt accessories, with short circuit protection, the Industries High Quality 12 volt Push Switch will give you a clean and original style look, they are install in the existing holes that come with the vehicle and it has a face surface size of 1.54″ x 0.83″ (39 mm x 21 mm).

FEATURES:

The switch is an electronic switch rated at 3 amp’s. Therefore in ALL cases the accessory MUST be wired through a fused relay.

KIT CONTAINS:

• 2 Toyota MOMENTARY Push Switch
• 2 Connector with cable for easy installation

FITS THESE VEHICLES:

Momentary Push Switch for Toyota – Winch IN-OUT Symbol is a Part of The Switch Masters

Momentary Small Push Switch for Toyota – IN-OUT Symbol

GABRIEL ESPINAL — Thu, 01 Aug 2019 15:40:00 +0000

Momentary Small Push Switch for Toyota – IN-OUT Symbol allows you to operate any 12 volt accessories, with short circuit protection, the Industries High Quality 12 volt Push Switch will give you a clean and original style look, they are install in the existing holes that come with the vehicle and it has a face surface size of 1.28″ x 0.87″ (32.5 mm x 22 mm).

FEATURES:

The switch is an electronic switch rated at 3 amp’s. Therefore in ALL cases the accessory MUST be wired through a fused relay.

KIT CONTAINS:

• 2 Toyota MOMENTARY Small Push Switch
• 2 Connector with cable for easy installation

FITS THESE VEHICLES:

• Toyota Tacoma 2012-ON (Center Console ONLY)
• Toyota Tundra 2007-ON
• Toyota 4Runner 2010-ON
• Toyota Land Cruiser Prado 150 Series 2010-2014
• Toyota Land Cruiser 200 Series 2008-2013
• Toyota Sequoia 2008-ON
• Toyota Corolla 2006-2013
• Toyota Highlander 2008-ON
• Toyota RAV4 2008-2012
• Toyota Yaris 2008
• Toyota Camry 2011-2014

Momentary Small Push Switch for Toyota – IN-OUT Symbol is a Part of The Switch Masters

Momentary Small Push Switch for Toyota – Winch IN-OUT Symbol

GABRIEL ESPINAL — Thu, 01 Aug 2019 15:34:00 +0000

Momentary Small Push Switch for Toyota – Winch IN-OUT Symbol allows you to operate any 12 volt accessories, with short circuit protection, the Industries High Quality 12 volt Push Switch will give you a clean and original style look, they are install in the existing holes that come with the vehicle and it has a face surface size of 1.28″ x 0.87″ (32.5 mm x 22 mm).

FEATURES:

The switch is an electronic switch rated at 3 amp’s. Therefore in ALL cases the accessory MUST be wired through a fused relay.

KIT CONTAINS:

• 2 Toyota MOMENTARY Small Push Switch
• 2 Connector with cable for easy installation

FITS THESE VEHICLES:

Momentary Small Push Switch for Toyota – Winch IN-OUT Symbol is a Part of The Switch Masters

Gray Series Momentary Rocker Switch Winch IN-OUT Symbol

GABRIEL ESPINAL — Tue, 10 Jan 2017 15:12:00 +0000

Gray Series Momentary Rocker Switch Winch IN-OUT Symbol is a double throw momentary switch (returns to center position by the spring) designed to operate your 12 volt 4WD Winch. it has a face surface size of 2″ x 1″ (50mm x 25mm) and uses a standard din size mounting hole of .86″ x 1.46″ (22mm x 37mm). this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Double Pole Double Throw MOMENTARY switch
• Gray hard surface rocker
• Twin upper and Single lower incandescent lights
• Upper lights are ON when the switch is pressed UP
• Lower light is ON when switch is pressed DOWN
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Gray Series Momentary Rocker Switch Winch IN-OUT Symbol is a product of The Switch Masters

Gray Series Momentary Rocker Switch Winch IN-OUT Symbol – Horizontal

GABRIEL ESPINAL — Tue, 10 Jan 2017 15:04:00 +0000

Gray Series Momentary Rocker Switch Winch IN-OUT Symbol – Horizontal is a double throw momentary switch (returns to center position by the spring) designed to operate your 12 volt 4WD Winch. it has a face surface size of 2″ x 1″ (50mm x 25mm) and uses a standard din size mounting hole of .86″ x 1.46″ (22mm x 37mm). this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

Gray Series Momentary Rocker Switch Winch IN-OUT Symbol – Horizontal is a product of The Switch Masters

Momentary Rocker Switch Winch IN-OUT Symbol – Horizontal

GABRIEL ESPINAL — Tue, 17 Mar 2015 14:44:00 +0000

Momentary Rocker Switch Winch IN-OUT Symbol – Horizontal is a double throw momentary switch (returns to center position by the spring) designed to operate your 12 volt 4WD Winch. it has a face surface size of 2″ x 1″ (50mm x 25mm) and uses a standard din size mounting hole of .86″ x 1.46″ (22mm x 37mm). this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.