Light Switch – The Switch Masters

2 Push Switch Panel for Toyota Tacoma 2016-2022

GABRIEL ESPINAL — Wed, 30 Mar 2022 13:09:00 +0000

2 Push Switch Panel for Toyota Tacoma 2016-2022 allows you to run up to 2 OEM style switches*. The panel mounts to the existing cubby hole opening to the left of the steering wheel on the 2016-2022 Toyota Tacoma (use OEM screws that hold cubby hole to the vehicle). This panel is made out of heavy duty ABS Plastic for years of service, will not rust like the competition.

*Switches are not included.

This plate is as easy as 3 steps to get you an additional 2 TOYOTA PUSH SWICTHES.

Step 1: Pop out the trim by simply using a pry tool to get the clips off, the entire front plate will come out.

Step 2: Remove four corner screws that are holding the cubby to the front cover.

Step 3: Align the Push Switch Panel for Toyota Tacoma 2016-2020, using the same screws you removed from the cubby attached to the front cover.

FEATURES:

• Made out of lightweight, durable long lasting ABS Plastic
• Provide a clean and organized place to add OEM push switches
• No cutting or drilling required
• Will not rust or bend like the competition
• No additional parts need it for install (use OEM screws)
• TOYOTA PUSH SWITCHES NOT INCLUDED

2 Push Switch Panel for Toyota Tacoma 2016-2022 is a product of The Switch Masters

Momentary Small Push Switch for Toyota – Horn Symbol

GABRIEL ESPINAL — Thu, 10 Mar 2022 11:19:00 +0000

Momentary Small Push Switch for Toyota – Horn Symbol allows you to operate any 12 volt accessories, with short circuit protection, the Industries High Quality 12 volt Push Switch will give you a clean and original style look, they are install in the existing holes that come with the vehicle and it has a face surface size of 1.28″ x 0.87″ (32.5 mm x 22 mm).

This switches are made out of heavy duty ABS plastic that will ensure years of service and come in a mate black surface color, the same color as the OEM Switches, All symbols are Laser etched directly onto the switch face using modern high Tech laser engraving equipment to ensure long image life.

FEATURES:

• The product is manufactured to fit in the OEM space available in your car or truck, simple to install
• Single Pole Single Throw MOMENTARY Push switch
• Black hard surface rocker
• Laser etched Legend
• Single upper L.E.D light
• Single lower L.E.D light
• Upper light is ON when the switch is pressed IN
• Lower light can be wired to separate dash light circuit
• Rated at 3 Amp 12V
• Wiring diagram supplied with switch

The switch is an electronic switch rated at 3 amp’s. Therefore in ALL cases the accessory MUST be wired through a fused relay.

KIT CONTAINS:

• 1 Toyota MOMENTARY Small Push Switch
• 1 Connector with cable for easy installation

FITS THESE VEHICLES:

• Toyota Tacoma 2012-ON (Center Console ONLY)
• Toyota Tundra 2007-ON
• Toyota 4Runner 2010-ON
• Toyota Land Cruiser Prado 150 Series 2010-2014
• Toyota Land Cruiser 200 Series 2008-2013
• Toyota Sequoia 2008-ON
• Toyota Corolla 2006-2013
• Toyota Highlander 2008-ON
• Toyota RAV4 2008-2012
• Toyota Yaris 2008
• Toyota Camry 2011-2014

Momentary Small Push Switch for Toyota – Horn Symbol is a Part of The Switch Masters

Momentary Push Switch for Toyota – Horn Symbol

GABRIEL ESPINAL — Thu, 10 Mar 2022 09:55:00 +0000

Momentary Push Switch for Toyota – Horn Symbol allows you to operate any 12 volt accessories, with short circuit protection, the Industries High Quality 12 volt Push Switch will give you a clean and original style look, they are install in the existing holes that come with the vehicle and it has a face surface size of 1.54″ x 0.83″ (39 mm x 21 mm).

FEATURES:

The switch is an electronic switch rated at 3 amp’s. Therefore in ALL cases the accessory MUST be wired through a fused relay.

KIT CONTAINS:

• 1 Toyota MOMENTARY Push Switch
• 1 Connector with cable for easy installation

FITS THESE VEHICLES:

• Toyota FJ Cruiser 2007-ON
• Toyota Fortuner 2005-2014
• Toyota Hilux 2005-2014
• Toyota Tacoma 2005-2011
• Toyota Tacoma 2012-ON (Left Side ONLY)
• Toyota Highlander 2001-2007
• Toyota Tundra 2005-2006 (Center Console if equipped)
• Toyota 4Runner 2003-2009
• Toyota Prado 120 Series 2003-2009
• Toyota Land Cruiser 100 Series 1998-2007
• Toyota Land Cruiser 75, 76, 78 & 79 series

Momentary Push Switch for Toyota – Horn Symbol is a Part of The Switch Masters

Small Dual Push Switch for Toyota – Front & Rear Camera Symbol

GABRIEL ESPINAL — Wed, 09 Mar 2022 15:22:00 +0000

Small Dual Push Switch for Toyota – Front & Rear Camera Symbol is perfect when you have limited space or wish to maximize your existing OEM switch locations, this dual switch doubles the number of switches you can install without the need to damage your vehicles dash by cutting additional holes giving you a clean and original style look, each OEM switch has a face surface size of 1.28″ x 0.87″ (32.5 mm x 22 mm).

These switches are made out of heavy-duty ABS plastic that will ensure years of service and come in a mate black surface color, the same color as the OEM Switches, All symbols are Laser etched directly onto the switch face using modern high Tech laser engraving equipment to ensure long image life.

These Switches are an aftermarket switch that locks into your existing panel super easy to install in less than 10 min’s.

FEATURES:

• The product is manufactured to fit in the OEM space available in your car or truck, simple to install
• Single powered input feeding two independently switched outputs
• Dual colored illumination powered via existing dash light circuit
• Blue/Amber illumination when the switch is in the OFF position and Green/White illumination when the switch is ON
• Laser etched Legend
• Rated at 3 Amp 12V
• Wiring diagram and Harness supplied with switch

The switch is an electronic switch rated at 3 amp’s. Therefore in ALL cases the accessory MUST be wired through a fused relay.

KIT CONTAINS:

• 1 Small Dual Push Switch
• 1 Connector with cable for easy installation

FITS THESE VEHICLES:

• Toyota Tacoma 2012-ON (Center Console ONLY)
• Toyota Tundra 2008-ON
• Toyota 4Runner 2010-ON
• Toyota Land Cruiser Prado 150 Series 2010-2014
• Toyota Land Cruiser 200 Series 2008-2013
• Toyota Sequoia 2008-ON
• Toyota Corolla 2006-2013
• Toyota Highlander 2008-ON
• Toyota RAV4 2008-2012
• Toyota Yaris 2008
• Toyota Camry 2011-2014

Small Dual Push Switch for Toyota – Front & Rear Camera Symbol is a The Switch Masters product

Small Dual Push Switch for Toyota – Spot & Flood Lights Symbol

GABRIEL ESPINAL — Wed, 09 Mar 2022 15:20:00 +0000

Small Dual Push Switch for Toyota – Spot & Flood Lights Symbol is perfect when you have limited space or wish to maximize your existing OEM switch locations, this dual switch doubles the number of switches you can install without the need to damage your vehicles dash by cutting additional holes giving you a clean and original style look, each OEM switch has a face surface size of 1.28″ x 0.87″ (32.5 mm x 22 mm).

These Switches are an aftermarket switch that locks into your existing panel super easy to install in less than 10 min’s.

FEATURES:

The switch is an electronic switch rated at 3 amp’s. Therefore in ALL cases the accessory MUST be wired through a fused relay.

KIT CONTAINS:

• 1 Small Dual Push Switch
• 1 Connector with cable for easy installation

FITS THESE VEHICLES:

Small Dual Push Switch for Toyota – Spot & Flood Lights Symbol is a The Switch Masters product

Small Dual Push Switch for Toyota – Side & Rock Lights Symbol

GABRIEL ESPINAL — Wed, 09 Mar 2022 15:17:00 +0000

Small Dual Push Switch for Toyota – Side & Rock Lights Symbol is perfect when you have limited space or wish to maximize your existing OEM switch locations, this dual switch doubles the number of switches you can install without the need to damage your vehicles dash by cutting additional holes giving you a clean and original style look, each OEM switch has a face surface size of 1.28″ x 0.87″ (32.5 mm x 22 mm).

These Switches are an aftermarket switch that locks into your existing panel super easy to install in less than 10 min’s.

FEATURES:

The switch is an electronic switch rated at 3 amp’s. Therefore in ALL cases the accessory MUST be wired through a fused relay.

KIT CONTAINS:

• 1 Small Dual Push Switch
• 1 Connector with cable for easy installation

FITS THESE VEHICLES:

Small Dual Push Switch for Toyota – Side & Rock Lights Symbol is a The Switch Masters product

Small Dual Push Switch for Toyota – Compressor & Diff Lock Symbol

GABRIEL ESPINAL — Wed, 09 Mar 2022 15:14:00 +0000

Small Dual Push Switch for Toyota – Compressor & Diff Lock Symbol is perfect when you have limited space or wish to maximize your existing OEM switch locations, this dual switch doubles the number of switches you can install without the need to damage your vehicles dash by cutting additional holes giving you a clean and original style look, each OEM switch has a face surface size of 1.28″ x 0.87″ (32.5 mm x 22 mm).

These Switches are an aftermarket switch that locks into your existing panel super easy to install in less than 10 min’s.

FEATURES:

The switch is an electronic switch rated at 3 amp’s. Therefore in ALL cases the accessory MUST be wired through a fused relay.

KIT CONTAINS:

• 1 Small Dual Push Switch
• 1 Connector with cable for easy installation

FITS THESE VEHICLES:

Small Dual Push Switch for Toyota – Compressor & Diff Lock Symbol is a The Switch Masters product

Dual Push Switch for Toyota – Front & Rear Camera Symbol

GABRIEL ESPINAL — Wed, 09 Mar 2022 15:11:00 +0000

Dual Push Switch for Toyota – Front & Rear Camera Symbol is perfect when you have limited space or wish to maximize your existing OEM switch locations, this dual switch doubles the number of switches you can install without the need to damage your vehicles dash by cutting additional holes giving you a clean and original style look, each OEM switch has a face surface size of 1.54″ x 0.83″ (39 mm x 21 mm).

These Switches are an aftermarket switch that locks into your existing panel super easy to install in less than 10 min’s.

FEATURES:

• The product is manufactured to fit in the OEM space available in your car or truck, simple to install
• Single powered input feeding two independently switched outputs
• Dual colored (Blue / Green) illumination powered via existing dash light circuit
• Blue illumination when the switch is in the OFF position and Green illumination when the switch is ON
• Laser etched Legend
• Rated at 3 Amp 12V
• Wiring diagram and Harness supplied with switch

The switch is an electronic switch rated at 3 amp’s. Therefore in ALL cases the accessory MUST be wired through a fused relay.

KIT CONTAINS:

• 1 Dual Push Switch
• 1 Connector with cable for easy installation

FITS THESE VEHICLES:

• Toyota Tacoma 2005-2011
• Toyota Tacoma 2012-2015 (Left Side ONLY)
• Toyota Tacoma 2016 – 2020 (Left Side ONLY)
• Toyota FJ Cruiser 2007-2014
• Toyota Fortuner 2005-2014
• Toyota Hilux 2005-2014
• Toyota Highlander 2001-2007
• Toyota Tundra 2005-2006 (Center Console if equipped)
• Toyota 4Runner 2003-2009
• Toyota Prado 120 Series 2003-2009
• Toyota Land Cruiser 100 Series 1998-2007
• Toyota Land Cruiser 75, 76, 78 & 79 series

Dual Push Switch for Toyota – Front & Rear Camera Symbol is a The Switch Masters product

Dual Push Switch for Toyota – Spot & Flood Lights Symbol

GABRIEL ESPINAL — Wed, 09 Mar 2022 15:09:00 +0000

Dual Push Switch for Toyota – Spot & Flood Lights Symbol is perfect when you have limited space or wish to maximize your existing OEM switch locations, this dual switch doubles the number of switches you can install without the need to damage your vehicles dash by cutting additional holes giving you a clean and original style look, each OEM switch has a face surface size of 1.54″ x 0.83″ (39 mm x 21 mm).

These Switches are an aftermarket switch that locks into your existing panel super easy to install in less than 10 min’s.

FEATURES:

• The product is manufactured to fit in the OEM space available in your car or truck, simple to install
• Single powered input feeding two independently switched outputs
• Dual colored (Blue / Green) illumination powered via existing dash light circuit
• Blue illumination when the switch is in the OFF position and Green illumination when the switch is ON
• Laser etched Legend
• Rated at 3 Amp 12V
• Wiring diagram and Harness supplied with switch

The switch is an electronic switch rated at 3 amp’s. Therefore in ALL cases the accessory MUST be wired through a fused relay.

KIT CONTAINS:

• 1 Dual Push Switch
• 1 Connector with cable for easy installation

FITS THESE VEHICLES:

Dual Push Switch for Toyota – Spot & Flood Lights Symbol is a The Switch Masters product

Dual Push Switch for Toyota – Side & Rock Lights Symbol

GABRIEL ESPINAL — Wed, 09 Mar 2022 15:07:00 +0000

Dual Push Switch for Toyota – Side & Rock Lights Symbol is perfect when you have limited space or wish to maximize your existing OEM switch locations, this dual switch doubles the number of switches you can install without the need to damage your vehicles dash by cutting additional holes giving you a clean and original style look, each OEM switch has a face surface size of 1.54″ x 0.83″ (39 mm x 21 mm).

These Switches are an aftermarket switch that locks into your existing panel super easy to install in less than 10 min’s.

FEATURES:

• The product is manufactured to fit in the OEM space available in your car or truck, simple to install
• Single powered input feeding two independently switched outputs
• Dual colored (Blue / Green) illumination powered via existing dash light circuit
• Blue illumination when the switch is in the OFF position and Green illumination when the switch is ON
• Laser etched Legend
• Rated at 3 Amp 12V
• Wiring diagram and Harness supplied with switch

The switch is an electronic switch rated at 3 amp’s. Therefore in ALL cases the accessory MUST be wired through a fused relay.

KIT CONTAINS:

• 1 Dual Push Switch
• 1 Connector with cable for easy installation