https://theswitchmasters.com Rocker, Push & Custom Switches Tue, 05 Apr 2022 02:55:44 +0000 en hourly 1 https://wordpress.org/?v=6.5.4 https://theswitchmasters.com/product/rocker-switch-jeep-wrangler-jk-roof-light-bar-symbol/ Fri, 13 Mar 2015 19:58:00 +0000 https://theswitchmasters.com/?post_type=product&p=8196 These high quality 12 volt Rocker switch is a single throw ON - OFF switch designed to operate your 12 volt accessories.

]]> Rocker Switch Jeep Wrangler JK Roof Light Bar Symbol is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch Jeep Wrangler JK Roof Light Bar Symbol is a Jeep Part of The Switch Masters

]]> https://theswitchmasters.com/product/rocker-switch-jeep-wrangler-jk-roof-light-bar-symbol-horizontal/ Fri, 13 Mar 2015 19:52:00 +0000 https://theswitchmasters.com/?post_type=product&p=8184 These high quality 12 volt Rocker switch is a single throw ON - OFF switch designed to operate your 12 volt accessories.

]]> Rocker Switch Jeep Wrangler JK Roof Light Bar Symbol is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch Jeep Wrangler JK Roof Light Bar Symbol is a Jeep Part of The Switch Masters

]]> https://theswitchmasters.com/product/rocker-switch-jeep-wrangler-jk-windshield-lights-symbol-horizontal/ Fri, 13 Mar 2015 19:48:00 +0000 https://theswitchmasters.com/?post_type=product&p=8172 These high quality 12 volt Rocker switch is a single throw ON - OFF switch designed to operate your 12 volt accessories.

]]> Rocker Switch Jeep Wrangler JK Windshield Lights Symbol is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch Jeep Wrangler JK Windshield Lights Symbol is a Jeep Part of The Switch Masters

]]> https://theswitchmasters.com/product/rocker-switch-jeep-wrangler-jk-bumper-lights-symbol-horizontal/ Wed, 07 Jan 2015 11:15:00 +0000 https://theswitchmasters.com/?post_type=product&p=6529 These high quality 12 volt Rocker switch is a single throw ON - OFF switch designed to operate your 12 volt accessories.

]]> Rocker Switch Jeep Wrangler JK Windshield Lights Symbol is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch Jeep Wrangler JK Bumper Lights Symbol – Horizontal is a Jeep Part of The Switch Masters

]]> https://theswitchmasters.com/product/rocker-switch-jeep-wrangler-jk-bumper-lights-symbol/ Wed, 07 Jan 2015 11:06:00 +0000 https://theswitchmasters.com/?post_type=product&p=6517 These high quality 12 volt Rocker switch is a single throw ON - OFF switch designed to operate your 12 volt accessories.

]]> Rocker Switch Jeep Wrangler JK Windshield Lights Symbol is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch Jeep Wrangler JK Bumper Lights Symbol is a Jeep Part of The Switch Masters

]]> https://theswitchmasters.com/product/rocker-switch-jeep-wrangler-rear-lights-horizontal/ Mon, 22 Sep 2014 18:20:00 +0000 https://theswitchmasters.com/?post_type=product&p=3465 These high quality 12 volt Rocker switch is a single throw ON - OFF switch designed to operate your 12 volt accessories.

]]> Rocker Switch Jeep Wrangler JK Rear Lights Symbol – Horizontal is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch Jeep Wrangler JK Rear Lights Symbol – Horizontal is a Jeep Part of The Switch Masters

]]> https://theswitchmasters.com/product/rocker-switch-jeep-wrangler-off-road-lights-horizontal/ Mon, 22 Sep 2014 18:05:00 +0000 https://theswitchmasters.com/?post_type=product&p=3451 These high quality 12 volt Rocker switch is a single throw ON - OFF switch designed to operate your 12 volt accessories.

]]> Rocker Switch Jeep Wrangler JK Off-Road Lights Symbol – Horizontal is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch Jeep Wrangler JK Off-Road Lights Symbol – Horizontal is a Jeep Part of The Switch Masters

]]>