https://theswitchmasters.com Rocker, Push & Custom Switches Wed, 06 Apr 2022 21:08:24 +0000 en hourly 1 https://wordpress.org/?v=6.5.4 https://theswitchmasters.com/product/rocker-switch-jeep-wrangler-jk-windshield-led-pods-symbol-horizontal/ Sat, 18 Feb 2017 13:08:00 +0000 https://theswitchmasters.com/?post_type=product&p=27220 Rocker Switch Jeep Wrangler JK Windshield LED Pods Symbol - Horizontal is a single throw ON - OFF switch designed to operate your 12 volt accessories.

]]> Rocker Switch Jeep Wrangler JK Windshield LED Pods Symbol – Horizontal is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch Jeep Wrangler JK Windshield LED Pods Symbol – Horizontal is a product of The Switch Masters

]]> https://theswitchmasters.com/product/rocker-switch-jeep-wrangler-jk-interior-floor-led-symbol-horizontal/ Sat, 18 Feb 2017 13:06:00 +0000 https://theswitchmasters.com/?post_type=product&p=27214 Rocker Switch Jeep Wrangler JK Interior Floor LED Symbol - Horizontal is a single throw ON - OFF switch designed to operate your 12 volt accessories.

]]> Rocker Switch Jeep Wrangler JK Interior Floor LED Symbol – Horizontal is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch Jeep Wrangler JK Interior Floor LED Symbol – Horizontal is a product of The Switch Masters

]]> https://theswitchmasters.com/product/rocker-switch-jeep-wrangler-jk-engine-light-symbol-horizontal/ Sat, 18 Feb 2017 13:03:00 +0000 https://theswitchmasters.com/?post_type=product&p=27208 Rocker Switch Jeep Wrangler JK Engine Light Symbol - Horizontal is a single throw ON - OFF switch designed to operate your 12 volt accessories.

]]> Rocker Switch Jeep Wrangler JK Engine Light Symbol – Horizontal is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch Jeep Wrangler JK Engine Light Symbol – Horizontal is a product of The Switch Masters

]]> https://theswitchmasters.com/product/rocker-switch-jeep-wrangler-jk-bull-bar-led-pods-symbol-horizontal/ Sat, 18 Feb 2017 13:00:00 +0000 https://theswitchmasters.com/?post_type=product&p=27202 Rocker Switch Jeep Wrangler JK Bull Bar LED Pods Symbol - Horizontal is a single throw ON - OFF switch designed to operate your 12 volt accessories.

]]> Rocker Switch Jeep Wrangler JK Bull Bar LED Pods Symbol – Horizontal is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch Jeep Wrangler JK Bull Bar LED Pods Symbol – Horizontal is a product of The Switch Masters

]]> https://theswitchmasters.com/product/rocker-switch-jeep-wrangler-jk-50-led-bar-symbol-horizontal/ Sat, 18 Feb 2017 12:49:00 +0000 https://theswitchmasters.com/?post_type=product&p=27190 Rocker Switch Jeep Wrangler JK 50" LED Bar Symbol - Horizontal is a single throw ON - OFF switch designed to operate your 12 volt accessories.

]]> Rocker Switch Jeep Wrangler JK 50″ LED Bar Symbol – Horizontal is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch Jeep Wrangler JK 50″ LED Bar Symbol – Horizontal is a product of The Switch Masters

]]> https://theswitchmasters.com/product/gray-series-momentary-rocker-switch-winch-in-out-symbol-horizontal/ Tue, 10 Jan 2017 15:04:00 +0000 https://theswitchmasters.com/?post_type=product&p=26496 Gray Series Momentary Rocker Switch Winch IN-OUT Symbol - Horizontal is a double throw momentary switch designed to operate your 12 volt 4WD Winch.

]]> Gray Series Momentary Rocker Switch Winch IN-OUT Symbol – Horizontal is a double throw momentary switch (returns to center position by the spring) designed to operate your 12 volt 4WD Winch. it has a face surface size of 2″ x 1″ (50mm x 25mm) and uses a standard din size mounting hole of .86″ x 1.46″ (22mm x 37mm). this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Double Pole Double Throw MOMENTARY switch
• Gray hard surface rocker
• Twin upper and Single lower incandescent lights
• Upper lights are ON when the switch is pressed UP
• Lower light is ON when switch is pressed DOWN
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Gray Series Momentary Rocker Switch Winch IN-OUT Symbol – Horizontal is a product of The Switch Masters

]]> https://theswitchmasters.com/product/gray-series-rocker-jeep-jk-windshield-lights-symbol-horizontal/ Tue, 10 Jan 2017 14:53:00 +0000 https://theswitchmasters.com/?post_type=product&p=26489 Gray Series Rocker Jeep JK Windshield Lights Symbol - Horizontal is a single throw ON - OFF switch designed to operate your 12 volt accessories.

]]> Gray Series Rocker Jeep JK Windshield Lights Symbol – Horizontal is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Gray hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Gray Series Rocker Jeep JK Windshield Lights Symbol – Horizontal is a product of The Switch Masters

]]> https://theswitchmasters.com/product/gray-series-rocker-jeep-jk-rock-lights-symbol-horizontal/ Tue, 10 Jan 2017 14:23:00 +0000 https://theswitchmasters.com/?post_type=product&p=26487 Gray Series Rocker Jeep JK Rock Lights Symbol - Horizontal is a single throw ON - OFF switch designed to operate your 12 volt accessories.

]]> Gray Series Rocker Jeep JK Rock Lights Symbol – Horizontal is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Gray hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Gray Series Rocker Jeep JK Rock Lights Symbol – Horizontal – Horizontal is a product of The Switch Masters

]]> https://theswitchmasters.com/product/gray-series-rocker-jeep-jk-roof-light-bar-symbol-horizontal/ Tue, 10 Jan 2017 14:19:00 +0000 https://theswitchmasters.com/?post_type=product&p=26485 Gray Series Rocker Jeep JK Roof Light Bar Symbol - Horizontal is a single throw ON - OFF switch designed to operate your 12 volt accessories.

]]> Gray Series Rocker Jeep JK Roof Light Bar Symbol – Horizontal is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Gray hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Gray Series Rocker Jeep JK Roof Light Bar Symbol – Horizontal is a product of The Switch Masters

]]> https://theswitchmasters.com/product/gray-series-rocker-jeep-jk-rear-lights-symbol-horizontal/ Tue, 10 Jan 2017 14:16:00 +0000 https://theswitchmasters.com/?post_type=product&p=26483 Gray Series Rocker Jeep JK Rear Lights Symbol - Horizontal is a single throw ON - OFF switch designed to operate your 12 volt accessories.

]]> Gray Series Rocker Jeep JK Rear Lights Symbol – Horizontal is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Gray hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Gray Series Rocker Jeep JK Rear Lights Symbol – Horizontal is a product of The Switch Masters

]]>