Vertical Jeep Series – The Switch Masters https://theswitchmasters.com Rocker, Push & Custom Switches Fri, 22 Apr 2022 16:04:16 +0000 en hourly 1 https://wordpress.org/?v=6.5.4 Gray Series Rocker Jeep JK Windshield Lights Symbol https://theswitchmasters.com/product/gray-series-rocker-jeep-jk-windshield-lights-symbol/ Tue, 10 Jan 2017 15:44:00 +0000 https://theswitchmasters.com/?post_type=product&p=26517 Gray Series Rocker Jeep JK Windshield Lights Symbol is a single throw ON - OFF switch designed to operate your 12 volt accessories.

Warning

]]> Gray Series Rocker Jeep JK Windshield Lights Symbol is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Gray hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Gray Series Rocker Jeep JK Windshield Lights Symbol is a product of The Switch Masters

]]> Gray Series Rocker Jeep JK Rock Lights Symbol https://theswitchmasters.com/product/gray-series-rocker-jeep-jk-rock-lights-symbol/ Tue, 10 Jan 2017 15:42:00 +0000 https://theswitchmasters.com/?post_type=product&p=26515 Gray Series Rocker Jeep JK Rock Lights Symbol is a single throw ON - OFF switch designed to operate your 12 volt accessories.

Warning

]]> Gray Series Rocker Jeep JK Rock Lights Symbol is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Gray hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Gray Series Rocker Jeep JK Rock Lights Symbol – Horizontal is a product of The Switch Masters

]]> Gray Series Rocker Jeep JK Roof Light Bar Symbol https://theswitchmasters.com/product/gray-series-rocker-jeep-jk-roof-light-bar-symbol/ Tue, 10 Jan 2017 15:40:00 +0000 https://theswitchmasters.com/?post_type=product&p=26513 Gray Series Rocker Jeep JK Roof Light Bar Symbol is a single throw ON - OFF switch designed to operate your 12 volt accessories.

Warning

]]> Gray Series Rocker Jeep JK Roof Light Bar Symbol is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Gray hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Gray Series Rocker Jeep JK Roof Light Bar Symbol is a product of The Switch Masters

]]> Gray Series Rocker Jeep JK Rear Lights Symbol https://theswitchmasters.com/product/gray-series-rocker-jeep-jk-rear-lights-symbol/ Tue, 10 Jan 2017 15:36:00 +0000 https://theswitchmasters.com/?post_type=product&p=26511 Gray Series Rocker Jeep JK Rear Lights Symbol is a single throw ON - OFF switch designed to operate your 12 volt accessories.

Warning

]]> Gray Series Rocker Jeep JK Rear Lights Symbol is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Gray hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Gray Series Rocker Jeep JK Rear Lights Symbol is a product of The Switch Masters

]]> Gray Series Rocker Jeep JK Rear Bumper Lights Symbol https://theswitchmasters.com/product/gray-series-rocker-jeep-jk-rear-bumper-lights-symbol/ Tue, 10 Jan 2017 15:33:00 +0000 https://theswitchmasters.com/?post_type=product&p=26509 Gray Series Rocker Jeep JK Rear Bumper Lights Symbol is a single throw ON - OFF switch designed to operate your 12 volt accessories.

Warning

]]> Gray Series Rocker Jeep JK Rear Bumper Lights Symbol is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Gray hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Gray Series Rocker Jeep JK Rear Bumper Lights Symbol is a product of The Switch Masters

]]> Gray Series Rocker Jeep JK Hood LED Bar Symbol https://theswitchmasters.com/product/gray-series-rocker-jeep-jk-hood-led-bar-symbol/ Tue, 10 Jan 2017 15:30:00 +0000 https://theswitchmasters.com/?post_type=product&p=26507 Gray Series Rocker Jeep JK Hood LED Bar Symbol is a single throw ON - OFF switch designed to operate your 12 volt accessories.

Warning

]]> Gray Series Rocker Jeep JK Hood LED Bar Symbol is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Gray hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Gray Series Rocker Jeep JK Hood LED Bar Symbol is a product of The Switch Masters

]]> Gray Series Rocker Jeep JK Off-Road Lights Symbol https://theswitchmasters.com/product/gray-series-rocker-jeep-jk-off-road-lights-symbol/ Tue, 10 Jan 2017 15:28:00 +0000 https://theswitchmasters.com/?post_type=product&p=26504 Gray Series Rocker Jeep JK Off-Road Lights Symbol is a single throw ON - OFF switch designed to operate your 12 volt accessories.

Warning

]]> Gray Series Rocker Jeep JK Off-Road Lights Symbol is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Gray hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Gray Series Rocker Jeep JK Off-Road Lights Symbol is a product of The Switch Masters

]]> Gray Series Rocker Jeep JK Bumper Lights Symbol https://theswitchmasters.com/product/gray-series-rocker-jeep-jk-bumper-lights-symbol/ Tue, 10 Jan 2017 15:25:00 +0000 https://theswitchmasters.com/?post_type=product&p=26502 Gray Series Rocker Jeep JK Bumper Lights Symbol is a single throw ON - OFF switch designed to operate your 12 volt accessories.

Warning

]]> Gray Series Rocker Jeep JK Bumper Lights Symbol is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Gray hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Gray Series Rocker Jeep JK Bumper Lights Symbol is a product of The Switch Masters

]]> Gray Series Rocker Jeep JK Bumper LED Bar Symbol https://theswitchmasters.com/product/gray-series-rocker-jeep-jk-bumper-led-bar-symbol/ Tue, 10 Jan 2017 15:18:00 +0000 https://theswitchmasters.com/?post_type=product&p=26500 Gray Series Rocker Jeep JK Bumper LED Bar Symbol is a single throw ON - OFF switch designed to operate your 12 volt accessories.

Warning

]]> Gray Series Rocker Jeep JK Bumper LED Bar Symbol is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Gray hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Gray Series Rocker Jeep JK Bumper LED Bar Symbol is a product of The Switch Masters

]]> Custom Laser-Etched Rocker Switches https://theswitchmasters.com/product/custom-laser-etched-rocker-switches/ Wed, 14 Sep 2016 12:39:00 +0000 https://theswitchmasters.com/?post_type=product&p=27697 Warning]]> Custom Laser-Etched Rocker Switches are single throw ON/OFF or MOMENTARY, designed to operate all of your 12v accessories or devices. Our Switches have many applications, from turning ON and OFF lights to powering winches, air horns, freezers, cooling fans, winch power, and even zombie lights. All symbols are laser etched directly onto the switch face to ensure long lasting image life. We do not use stickers, paint or ink in our switches, which will wear off in a very short time, this also gives the switch a more styling and clean design.

FEATURES:

• Different lights color to choose from (Blue-Red-Green-White-Amber)
• Black hard surface rocker
• Double LED light on every switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V / 10A 24V
• No rear barriers between terminals
• Easy to install, wiring diagram supplied with switch

These switches have a surface of 2” (50mm) x 1” (25mm) and they use a standard din size mounting hole of 1.50” (38mm) x 0.82” (21mm); these are the standard size measurements. Our switches come packed with instructions on the back of each of them and we also have our technical support staff here to help you.

NOTE: These switches are not intended or manufactured to replace original manufacturer equipment or switches that came in your vehicle from factory, in many cases you will have to trim/cut or adapt the mounting hole for the switch to fit, we have many adapters or switch panels and pods that will help you install them in your vehicles depending on the application. Please make sure you verify if your vehicle is compatible with adding additional switches since there are many vehicles out in the industry with different set ups. Also check with a Mobile audio and electronics professional to make sure you are getting the correct installation for your vehicle. (CONTACT US IF NOT SURE IF IT FITS YOUR VEHICLE BEFORE YOU BUY)

Custom Laser-Etched Rocker Switches is a Part of The Switch Masters

]]>