V 2.0 Series – The Switch Masters https://theswitchmasters.com Rocker, Push & Custom Switches Fri, 22 Apr 2022 16:04:16 +0000 en hourly 1 https://wordpress.org/?v=6.5.4 Custom Laser-Etched Rocker Switches https://theswitchmasters.com/product/custom-laser-etched-rocker-switches/ Wed, 14 Sep 2016 12:39:00 +0000 https://theswitchmasters.com/?post_type=product&p=27697 Warning]]> Custom Laser-Etched Rocker Switches are single throw ON/OFF or MOMENTARY, designed to operate all of your 12v accessories or devices. Our Switches have many applications, from turning ON and OFF lights to powering winches, air horns, freezers, cooling fans, winch power, and even zombie lights. All symbols are laser etched directly onto the switch face to ensure long lasting image life. We do not use stickers, paint or ink in our switches, which will wear off in a very short time, this also gives the switch a more styling and clean design.

FEATURES:

• Different lights color to choose from (Blue-Red-Green-White-Amber)
• Black hard surface rocker
• Double LED light on every switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V / 10A 24V
• No rear barriers between terminals
• Easy to install, wiring diagram supplied with switch

These switches have a surface of 2” (50mm) x 1” (25mm) and they use a standard din size mounting hole of 1.50” (38mm) x 0.82” (21mm); these are the standard size measurements. Our switches come packed with instructions on the back of each of them and we also have our technical support staff here to help you.

NOTE: These switches are not intended or manufactured to replace original manufacturer equipment or switches that came in your vehicle from factory, in many cases you will have to trim/cut or adapt the mounting hole for the switch to fit, we have many adapters or switch panels and pods that will help you install them in your vehicles depending on the application. Please make sure you verify if your vehicle is compatible with adding additional switches since there are many vehicles out in the industry with different set ups. Also check with a Mobile audio and electronics professional to make sure you are getting the correct installation for your vehicle. (CONTACT US IF NOT SURE IF IT FITS YOUR VEHICLE BEFORE YOU BUY)

Custom Laser-Etched Rocker Switches is a Part of The Switch Masters

]]> Rocker Switch V2 Lion Lights Symbol 4 – Horizontal https://theswitchmasters.com/product/rocker-switch-v2-lion-lights-symbol-4-horizontal/ Wed, 13 Jan 2016 10:11:00 +0000 https://theswitchmasters.com/?post_type=product&p=18062 Rocker Switch V2 Lion Lights Symbol 4 - Horizontal, these high quality 12 volt Rocker switch is a single throw ON - OFF switch designed to operate your 12 volt accessories.

Warning

]]> Rocker Switch V2 Lion Lights Symbol 4 – Horizontal is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch V2 Lion Lights Symbol 4 – Horizontal is a Part of The Switch Masters

]]> Rocker Switch V2 Crawl Control Symbol – Horizontal https://theswitchmasters.com/product/rocker-switch-v2-crawl-control-symbol-horizontal/ Wed, 13 Jan 2016 10:11:00 +0000 https://theswitchmasters.com/?post_type=product&p=18072 Rocker Switch V2 Crawl Control Symbol - Horizontal, these high quality 12 volt Rocker switch is a single throw ON - OFF switch designed to operate your 12 volt accessories.

Warning

]]> Rocker Switch V2 Crawl Control Symbol – Horizontal is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch V2 Crawl Control Symbol – Horizontal is a Part of The Switch Masters

]]> Rocker Switch V2 Turtle Lights Symbol – Horizontal https://theswitchmasters.com/product/rocker-switch-v2-turtle-lights-symbol-horizontal/ Wed, 13 Jan 2016 10:11:00 +0000 https://theswitchmasters.com/?post_type=product&p=18082 Rocker Switch V2 Turtle Lights Symbol - Horizontal, these high quality 12 volt Rocker switch is a single throw ON - OFF switch designed to operate your 12 volt accessories.

Warning

]]> Rocker Switch V2 Turtle Lights Symbol – Horizontal is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch V2 Turtle Lights Symbol – Horizontal is a Part of The Switch Masters

]]> Rocker Switch V2 Death Lights Symbol – Horizontal https://theswitchmasters.com/product/rocker-switch-v2-death-lights-symbol-horizontal/ Wed, 13 Jan 2016 10:11:00 +0000 https://theswitchmasters.com/?post_type=product&p=18092 Rocker Switch V2 Death Lights Symbol - Horizontal, these high quality 12 volt Rocker switch is a single throw ON - OFF switch designed to operate your 12 volt accessories.

Warning

]]> Rocker Switch V2 Death Lights Symbol – Horizontal is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch V2 Death Lights Symbol – Horizontal is a Part of The Switch Masters

]]> Rocker Switch V2 Tiger Lights Symbol – Horizontal https://theswitchmasters.com/product/rocker-switch-v2-tiger-lights-symbol-horizontal/ Wed, 13 Jan 2016 10:10:00 +0000 https://theswitchmasters.com/?post_type=product&p=18002 Rocker Switch V2 Tiger Lights Symbol - Horizontal, these high quality 12 volt Rocker switch is a single throw ON - OFF switch designed to operate your 12 volt accessories.

Warning

]]> Rocker Switch V2 Tiger Lights Symbol – Horizontal is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch V2 Tiger Lights Symbol – Horizontal is a Part of The Switch Masters

]]> Rocker Switch V2 Deer Lights Symbol – Horizontal https://theswitchmasters.com/product/rocker-switch-v2-deer-lights-symbol-horizontal/ Wed, 13 Jan 2016 10:10:00 +0000 https://theswitchmasters.com/?post_type=product&p=18012 Rocker Switch V2 Deer Lights Symbol - Horizontal, these high quality 12 volt Rocker switch is a single throw ON - OFF switch designed to operate your 12 volt accessories.

Warning

]]> Rocker Switch V2 Deer Lights Symbol – Horizontal is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch V2 Deer Lights Symbol – Horizontal is a Part of The Switch Masters

]]> Rocker Switch V2 4WD Symbol – Horizontal https://theswitchmasters.com/product/rocker-switch-v2-4wd-symbol-horizontal/ Wed, 13 Jan 2016 10:10:00 +0000 https://theswitchmasters.com/?post_type=product&p=18022 Rocker Switch V2 4WD Symbol - Horizontal, these high quality 12 volt Rocker switch is a single throw ON - OFF switch designed to operate your 12 volt accessories.

Warning

]]> Rocker Switch V2 4WD Symbol – Horizontal is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch V2 4WD Symbol – Horizontal is a Part of The Switch Masters

]]> Rocker Switch V2 Panter Lights Symbol – Horizontal https://theswitchmasters.com/product/rocker-switch-v2-panter-lights-symbol-horizontal/ Wed, 13 Jan 2016 10:10:00 +0000 https://theswitchmasters.com/?post_type=product&p=18032 Rocker Switch V2 Panter Lights Symbol - Horizontal, these high quality 12 volt Rocker switch is a single throw ON - OFF switch designed to operate your 12 volt accessories.

Warning

]]> Rocker Switch V2 Panter Lights Symbol – Horizontal is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch V2 Panter Lights Symbol – Horizontal is a Part of The Switch Masters

]]> Rocker Switch V2 Eagle Lights Symbol – Horizontal https://theswitchmasters.com/product/rocker-switch-v2-eagle-lights-symbol-horizontal/ Wed, 13 Jan 2016 10:10:00 +0000 https://theswitchmasters.com/?post_type=product&p=18042 Rocker Switch V2 Eagle Lights Symbol - Horizontal, these high quality 12 volt Rocker switch is a single throw ON - OFF switch designed to operate your 12 volt accessories.

Warning

]]> Rocker Switch V2 Eagle Lights Symbol – Horizontal is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch V2 Eagle Lights Symbol – Horizontal is a Part of The Switch Masters

]]>