Rocker Switches – The Switch Masters https://theswitchmasters.com Rocker, Push & Custom Switches Tue, 05 Apr 2022 03:52:47 +0000 en hourly 1 https://wordpress.org/?v=6.5.4 Momentary Rocker Switch Winch IN-OUT Symbol https://theswitchmasters.com/product/momentary-rocker-switch-winch-in-out-symbol/ Mon, 04 Apr 2022 14:49:00 +0000 https://theswitchmasters.com/?post_type=product&p=91329 Momentary Rocker Switch Winch IN-OUT Symbol is a double throw momentary switch (returns to center position by the spring) designed to operate your 12 volt 4WD Winch.]]> Momentary Rocker Switch Winch IN-OUT Symbol is a double throw momentary switch (returns to center position by the spring) designed to operate your 12 volt 4WD Winch. it has a face surface size of 2″ x 1″ (50mm x 25mm) and uses a standard din size mounting hole of .86″ x 1.46″ (22mm x 37mm). this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

FEATURES:

• Double Pole Double Throw MOMENTARY switch
• Black hard surface rocker
• Twin upper and Single lower incandescent lights
• Upper lights are ON when the switch is pressed UP
• Lower light is ON when switch is pressed DOWN
• Same size as the Carling and ARB switches
• Rated 20A 12V
• No rear barriers between terminals
• Wiring diagram supplied with switch

Momentary Rocker Switch Winch IN-OUT Symbol is a product of The Switch Masters

]]> Rocker Switch V3 Winch Power Symbol https://theswitchmasters.com/product/rocker-switch-v3-winch-power-symbol/ Fri, 18 Feb 2022 15:31:00 +0000 https://theswitchmasters.com/?post_type=product&p=90604 Rocker Switch V3 Winch Power Symbol, these high quality 12/24 volt Rocker switch is a single throw ON - OFF switch designed to operate your accessories.

Warning

]]> Rocker Switch V3 Winch Power Symbol is a single throw ON – OFF switch designed to operate your accessories. They have a face surface size of 1.93” (49mm) x 1” (26mm) and uses a standard din size mounting hole of 1.5” (37.5mm) x .80” (21.2mm), this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face using modern high Tech laser engraving equipment to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

The switch is rated to 20amp at 12V and 10amp at 24V however in ALL case we recommend that you wire the accessory through a fused relay.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 12V 20A / 24V 10A
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch V3 Winch Power Symbol is a Part of The Switch Masters

]]> Rocker Switch V3 Zombie Lights Symbol https://theswitchmasters.com/product/rocker-switch-v3-zombie-lights-symbol/ Fri, 18 Feb 2022 15:29:00 +0000 https://theswitchmasters.com/?post_type=product&p=90596 Rocker Switch V3 Zombie Lights Symbol, these high quality 12/24 volt Rocker switch is a single throw ON - OFF switch designed to operate your accessories.

Warning

]]> Rocker Switch V3 Zombie Lights Symbol is a single throw ON – OFF switch designed to operate your accessories. They have a face surface size of 1.93” (49mm) x 1” (26mm) and uses a standard din size mounting hole of 1.5” (37.5mm) x .80” (21.2mm), this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face using modern high Tech laser engraving equipment to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

The switch is rated to 20amp at 12V and 10amp at 24V however in ALL case we recommend that you wire the accessory through a fused relay.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 12V 20A / 24V 10A
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch V3 Zombie Lights Symbol is a Part of The Switch Masters

]]> Rocker Switch V3 Side Lights Symbol https://theswitchmasters.com/product/rocker-switch-v3-side-lights-symbol/ Fri, 18 Feb 2022 15:28:00 +0000 https://theswitchmasters.com/?post_type=product&p=90588 Rocker Switch V3 Side Lights Symbol, these high quality 12/24 volt Rocker switch is a single throw ON - OFF switch designed to operate your accessories.

Warning

]]> Rocker Switch V3 Side Lights Symbol is a single throw ON – OFF switch designed to operate your accessories. They have a face surface size of 1.93” (49mm) x 1” (26mm) and uses a standard din size mounting hole of 1.5” (37.5mm) x .80” (21.2mm), this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face using modern high Tech laser engraving equipment to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

The switch is rated to 20amp at 12V and 10amp at 24V however in ALL case we recommend that you wire the accessory through a fused relay.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 12V 20A / 24V 10A
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch V3 Side Lights Symbol is a Part of The Switch Masters

]]> Rocker Switch V3 Rock Lights Symbol https://theswitchmasters.com/product/rocker-switch-v3-rock-lights-symbol/ Fri, 18 Feb 2022 15:26:00 +0000 https://theswitchmasters.com/?post_type=product&p=90580 Rocker Switch V3 Rock Lights Symbol, these high quality 12/24 volt Rocker switch is a single throw ON - OFF switch designed to operate your accessories.

Warning

]]> Rocker Switch V3 Rock Lights Symbol is a single throw ON – OFF switch designed to operate your accessories. They have a face surface size of 1.93” (49mm) x 1” (26mm) and uses a standard din size mounting hole of 1.5” (37.5mm) x .80” (21.2mm), this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face using modern high Tech laser engraving equipment to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

The switch is rated to 20amp at 12V and 10amp at 24V however in ALL case we recommend that you wire the accessory through a fused relay.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 12V 20A / 24V 10A
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch V3 Rock Lights Symbol is a Part of The Switch Masters

]]> Rocker Switch V3 Rear Light Symbol https://theswitchmasters.com/product/rocker-switch-v3-rear-light-symbol/ Fri, 18 Feb 2022 15:24:00 +0000 https://theswitchmasters.com/?post_type=product&p=90572 Rocker Switch V3 Rear Light Symbol, these high quality 12/24 volt Rocker switch is a single throw ON - OFF switch designed to operate your accessories.

Warning

]]> Rocker Switch V3 Rear Light Symbol is a single throw ON – OFF switch designed to operate your accessories. They have a face surface size of 1.93” (49mm) x 1” (26mm) and uses a standard din size mounting hole of 1.5” (37.5mm) x .80” (21.2mm), this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face using modern high Tech laser engraving equipment to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

The switch is rated to 20amp at 12V and 10amp at 24V however in ALL case we recommend that you wire the accessory through a fused relay.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 12V 20A / 24V 10A
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch V3 Rear Light Symbol is a Part of The Switch Masters

]]> Rocker Switch V3 Off Road Lights Symbol https://theswitchmasters.com/product/rocker-switch-v3-off-road-lights-symbol/ Fri, 18 Feb 2022 15:22:00 +0000 https://theswitchmasters.com/?post_type=product&p=90564 Rocker Switch V3 Off Road Lights Symbol, these high quality 12/24 volt Rocker switch is a single throw ON - OFF switch designed to operate your accessories.

Warning

]]> Rocker Switch V3 Off Road Lights Symbol is a single throw ON – OFF switch designed to operate your accessories. They have a face surface size of 1.93” (49mm) x 1” (26mm) and uses a standard din size mounting hole of 1.5” (37.5mm) x .80” (21.2mm), this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face using modern high Tech laser engraving equipment to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

The switch is rated to 20amp at 12V and 10amp at 24V however in ALL case we recommend that you wire the accessory through a fused relay.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 12V 20A / 24V 10A
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch V3 Off Road Lights Symbol is a Part of The Switch Masters

]]> Rocker Switch V3 Pod Lights Symbol https://theswitchmasters.com/product/rocker-switch-v3-pod-lights-symbol/ Fri, 18 Feb 2022 15:19:00 +0000 https://theswitchmasters.com/?post_type=product&p=90556 Rocker Switch V3 Pod Lights Symbol, these high quality 12/24 volt Rocker switch is a single throw ON - OFF switch designed to operate your accessories.

Warning

]]> Rocker Switch V3 Pod Lights Symbol is a single throw ON – OFF switch designed to operate your accessories. They have a face surface size of 1.93” (49mm) x 1” (26mm) and uses a standard din size mounting hole of 1.5” (37.5mm) x .80” (21.2mm), this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face using modern high Tech laser engraving equipment to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

The switch is rated to 20amp at 12V and 10amp at 24V however in ALL case we recommend that you wire the accessory through a fused relay.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 12V 20A / 24V 10A
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch V3 Pod Lights Symbol is a Part of The Switch Masters

]]> Rocker Switch V3 LED Light Bar Symbol https://theswitchmasters.com/product/rocker-switch-v3-led-light-bar-symbol/ Fri, 18 Feb 2022 15:17:00 +0000 https://theswitchmasters.com/?post_type=product&p=90548 Rocker Switch V3 LED Light Bar Symbol, these high quality 12/24 volt Rocker switch is a single throw ON - OFF switch designed to operate your accessories.

Warning

]]> Rocker Switch V3 LED Light Bar Symbol is a single throw ON – OFF switch designed to operate your accessories. They have a face surface size of 1.93” (49mm) x 1” (26mm) and uses a standard din size mounting hole of 1.5” (37.5mm) x .80” (21.2mm), this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face using modern high Tech laser engraving equipment to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

The switch is rated to 20amp at 12V and 10amp at 24V however in ALL case we recommend that you wire the accessory through a fused relay.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 12V 20A / 24V 10A
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch V3 LED Light Bar Symbol is a Part of The Switch Masters

]]> Rocker Switch V3 Interior Lights Symbol https://theswitchmasters.com/product/rocker-switch-v3-interior-lights-symbol/ Fri, 18 Feb 2022 15:15:00 +0000 https://theswitchmasters.com/?post_type=product&p=90540 Rocker Switch V3 Interior Lights Symbol, these high quality 12/24 volt Rocker switch is a single throw ON - OFF switch designed to operate your accessories.

Warning

]]> Rocker Switch V3 Interior Lights Symbol is a single throw ON – OFF switch designed to operate your accessories. They have a face surface size of 1.93” (49mm) x 1” (26mm) and uses a standard din size mounting hole of 1.5” (37.5mm) x .80” (21.2mm), this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure.

All symbols are laser etched directly onto the switch face using modern high Tech laser engraving equipment to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

The switch is rated to 20amp at 12V and 10amp at 24V however in ALL case we recommend that you wire the accessory through a fused relay.

FEATURES:

• Single Pole Single Throw ON-OFF switch
• Black hard surface rocker
• Two LEDs in the switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 12V 20A / 24V 10A
• No rear barriers between terminals
• Wiring diagram supplied with switch

Rocker Switch V3 Interior Lights Symbol is a Part of The Switch Masters

]]>