Rocker & Push Custom Switches – The Switch Masters https://theswitchmasters.com Rocker, Push & Custom Switches Fri, 22 Apr 2022 16:04:28 +0000 en hourly 1 https://wordpress.org/?v=6.5.4 Custom Laser-Etched Small Dual Push Switches for Toyota https://theswitchmasters.com/product/custom-laser-etched-small-dual-push-switches-for-toyota/ Mon, 18 Oct 2021 01:15:00 +0000 https://theswitchmasters.com/?post_type=product&p=91721 Custom Laser-Etched Small Dual Push Switches for Toyota are perfect when you have limited space or wish to maximize your existing OEM switch locations, this dual switch doubles the number of switches you can install without the need to damage your vehicles dash by cutting additional holes. HOW TO MAKE YOUR DUAL CUSTOM SWITCH (Click here to Video Tutorial) Toyota Small Push Switch Air Compressor Symbol 2

]]>

Custom Laser-Etched Small Dual Push Switches for Toyota are perfect when you have limited space or wish to maximize your existing OEM switch locations, this dual switch doubles the number of switches you can install without the need to damage your vehicles dash by cutting additional holes giving you a clean and original style look, each OEM switch has a face surface size of 1.28″ x 0.87″ (32.5 mm x 22 mm).

These switches are made out of heavy-duty ABS plastic that will ensure years of service and come in a mate black surface color, the same color as the OEM Switches, All symbols are Laser etched directly onto the switch face using modern high Tech laser engraving equipment to ensure long image life.

These Switches are an aftermarket switch that locks into your existing panel super easy to install in less than 10 min’s.

FEATURES:

• The product is manufactured to fit in the OEM space available in your car or truck, simple to install
• Single powered input feeding two independently switched outputs
• Dual colored (Blue / Green) illumination powered via existing dash light circuit
• Blue illumination when the switch is in the OFF position and Green illumination when the switch is ON
• Laser etched Legend
• Rated at 3 Amp 12V
• Wiring diagram and Harness supplied with switch

The switch is an electronic switch rated at 3 amp’s. Therefore in ALL cases the accessory MUST be wired through a fused relay.

KIT CONTAINS:

• 1 Custom Laser-Etched Small Dual Push Switch
• 1 Connector with cable for easy installation

FITS THESE VEHICLES:

• Toyota Tacoma 2012-ON (Center Console ONLY)
• Toyota Tundra 2008-ON
• Toyota 4Runner 2010-ON
• Toyota Land Cruiser Prado 150 Series 2010-2014
• Toyota Land Cruiser 200 Series 2008-2013
• Toyota Sequoia 2008-ON
• Toyota Corolla 2006-2013
• Toyota Highlander 2008-ON
• Toyota RAV4 2008-2012
• Toyota Yaris 2008
• Toyota Camry 2011-2014

HOW TO MAKE YOUR DUAL CUSTOM SWITCH:

HOW TO MAKE YOUR DUAL CUSTOM SWITCH (Click here to Video Tutorial)

Custom Laser-Etched Small Dual Push Switches for Toyota are a The Switch Masters product

]]> Custom Laser-Etched Dual Push Switches for Toyota https://theswitchmasters.com/product/custom-laser-etched-dual-push-switches-for-toyota/ Sat, 06 May 2017 22:00:00 +0000 https://theswitchmasters.com/?post_type=product&p=84459 Custom Laser-Etched Dual Push Switches for Toyota are perfect when you have limited space or wish to maximize your existing OEM switch locations, this dual switch doubles the number of switches you can install without the need to damage your vehicles dash by cutting additional holes. HOW TO MAKE YOUR DUAL CUSTOM SWITCH (Click here to Video Tutorial) Toyota Push Switch Air Compressor Symbol 2]]>

Custom Laser-Etched Dual Push Switches for Toyota are perfect when you have limited space or wish to maximize your existing OEM switch locations, this dual switch doubles the number of switches you can install without the need to damage your vehicles dash by cutting additional holes giving you a clean and original style look, each OEM switch has a face surface size of 1.54″ x 0.83″ (39 mm x 21 mm).

These switches are made out of heavy-duty ABS plastic that will ensure years of service and come in a mate black surface color, the same color as the OEM Switches, All symbols are Laser etched directly onto the switch face using modern high Tech laser engraving equipment to ensure long image life.

These Switches are an aftermarket switch that locks into your existing panel super easy to install in less than 10 min’s.

FEATURES:

• The product is manufactured to fit in the OEM space available in your car or truck, simple to install
• Single powered input feeding two independently switched outputs
• Dual colored (Blue / Green) illumination powered via existing dash light circuit
• Blue illumination when the switch is in the OFF position and Green illumination when the switch is ON
• Laser etched Legend
• Rated at 3 Amp 12V
• Wiring diagram and Harness supplied with switch

The switch is an electronic switch rated at 3 amp’s. Therefore in ALL cases the accessory MUST be wired through a fused relay.

KIT CONTAINS:

• 1 Custom Laser-Etched Dual Push Switch
• 1 Connector with cable for easy installation

FITS THESE VEHICLES:

• Toyota Tacoma 2005-2011
• Toyota Tacoma 2012-2015 (Left Side ONLY)
• Toyota Tacoma 2016 – 2020 (Left Side ONLY)
• Toyota FJ Cruiser 2007-2014
• Toyota Fortuner 2005-2014
• Toyota Hilux 2005-2014
• Toyota Highlander 2001-2007
• Toyota Tundra 2005-2006 (Center Console if equipped)
• Toyota 4Runner 2003-2009
• Toyota Prado 120 Series 2003-2009
• Toyota Land Cruiser 100 Series 1998-2007
• Toyota Land Cruiser 75, 76, 78 & 79 series

HOW TO MAKE YOUR DUAL CUSTOM SWITCH:

HOW TO MAKE YOUR DUAL CUSTOM SWITCH (Click here to Video Tutorial)

Custom Laser-Etched Dual Push Switches for Toyota are a The Switch Masters product

]]> Custom Laser-Etched Small Push Switches for Toyota https://theswitchmasters.com/product/custom-laser-etched-small-push-switches-for-toyota/ Thu, 30 Mar 2017 16:54:00 +0000 https://theswitchmasters.com/?post_type=product&p=27653 Custom Laser-Etched Toyota Small Push Switches]]> Custom Laser-Etched Small Push Switches for Toyota allows you to operate any 12 volt accessories, with short circuit protection, the Industries High Quality 12 volt Push Switch will give you a clean and original style look, they are install in the existing holes that come with the vehicle and it has a face surface size of 1.28″ x 0.87″ (32.5 mm x 22 mm).

This switches are made out of heavy duty ABS plastic that will ensure years of service and come in a mate black surface color, the same color as the OEM Switches, All symbols are Laser etched directly onto the switch face using modern high Tech laser engraving equipment to ensure long image life.

FEATURES:

• The product is manufactured to fit in the OEM space available in your car or truck, simple to install
• Black hard surface rocker.
• Laser etched Legend
• Single upper L.E.D light.
• Single lower L.E.D light.
• Upper light is ON when the switch is pressed IN.
• Lower light can be wired to separate dash light circuit.
• Rated at 3 Amp 12V.
• Wiring diagram supplied with switch

The switch is an electronic switch rated at 3 amp’s. Therefore in ALL cases the accessory MUST be wired through a fused relay.

KIT CONTAINS:

• 1 Toyota Small Push Switch
• 1 Connector with cable for easy installation

FITS THESE VEHICLES:

• Toyota Tacoma 2012-ON (Center Console ONLY)
• Toyota Tundra 2007-ON
• Toyota 4Runner 2010-ON
• Toyota Land Cruiser Prado 150 Series 2010-2014
• Toyota Land Cruiser 200 Series 2008-2013
• Toyota Sequoia 2008-ON
• Toyota Corolla 2006-2013
• Toyota Highlander 2008-ON
• Toyota RAV4 2008-2012
• Toyota Yaris 2008
• Toyota Camry 2011-2014

Custom Laser-Etched Small Push Switches for Toyota are a The Switch Masters products

]]> Custom Laser-Etched Push Switches for Toyota https://theswitchmasters.com/product/custom-laser-etched-push-switches-for-toyota/ Sat, 05 Nov 2016 10:16:00 +0000 https://theswitchmasters.com/?post_type=product&p=25679 Custom Laser-Etched Toyota Push Switches]]> Custom Laser-Etched Push Switches for Toyota allows you to operate any 12 volt accessories, with short circuit protection, the Industries High Quality 12 volt Push Switch will give you a clean and original style look, they are install in the existing holes that come with the vehicle and it has a face surface size of 1.54″ x 0.83″ (39 mm x 21 mm).

This switches are made out of heavy duty ABS plastic that will ensure years of service and come in a mate black surface color, the same color as the OEM Switches, All symbols are Laser etched directly onto the switch face using modern high Tech laser engraving equipment to ensure long image life.

FEATURES:

• The product is manufactured to fit in the OEM space available in your car or truck, simple to install
• Black hard surface rocker.
• Laser etched Legend
• Single upper L.E.D light.
• Single lower L.E.D light.
• Upper light is ON when the switch is pressed IN.
• Lower light can be wired to separate dash light circuit.
• Rated at 3 Amp 12V.
• Wiring diagram supplied with switch

The switch is an electronic switch rated at 3 amp’s. Therefore in ALL cases the accessory MUST be wired through a fused relay.

KIT CONTAINS:

• 1 Toyota Push Switch
• 1 Connector with cable for easy installation

FITS THESE VEHICLES:

• Toyota FJ Cruiser 2007-ON
• Toyota Fortuner 2005-2014
• Toyota Hilux 2005-2014
• Toyota Tacoma 2005-2011
• Toyota Tacoma 2012-ON (Left Side ONLY)
• Toyota Highlander 2001-2007
• Toyota Tundra 2005-2006 (Center Console if equipped)
• Toyota 4Runner 2003-2009
• Toyota Prado 120 Series 2003-2009
• Toyota Land Cruiser 100 Series 1998-2007
• Toyota Land Cruiser 75, 76, 78 & 79 series

Custom Laser-Etched Push Switches for Toyota are a The Switch Masters products

]]> Custom Laser-Etched Rocker Switches https://theswitchmasters.com/product/custom-laser-etched-rocker-switches/ Wed, 14 Sep 2016 12:39:00 +0000 https://theswitchmasters.com/?post_type=product&p=27697 Warning]]> Custom Laser-Etched Rocker Switches are single throw ON/OFF or MOMENTARY, designed to operate all of your 12v accessories or devices. Our Switches have many applications, from turning ON and OFF lights to powering winches, air horns, freezers, cooling fans, winch power, and even zombie lights. All symbols are laser etched directly onto the switch face to ensure long lasting image life. We do not use stickers, paint or ink in our switches, which will wear off in a very short time, this also gives the switch a more styling and clean design.

FEATURES:

• Different lights color to choose from (Blue-Red-Green-White-Amber)
• Black hard surface rocker
• Double LED light on every switch
• Upper LED is ON only when the switch is turned ON
• Lower LED is independent
• Both LEDs have separate grounds
• Same size as the Carling and ARB switches
• Rated 20A 12V / 10A 24V
• No rear barriers between terminals
• Easy to install, wiring diagram supplied with switch

These switches have a surface of 2” (50mm) x 1” (25mm) and they use a standard din size mounting hole of 1.50” (38mm) x 0.82” (21mm); these are the standard size measurements. Our switches come packed with instructions on the back of each of them and we also have our technical support staff here to help you.

NOTE: These switches are not intended or manufactured to replace original manufacturer equipment or switches that came in your vehicle from factory, in many cases you will have to trim/cut or adapt the mounting hole for the switch to fit, we have many adapters or switch panels and pods that will help you install them in your vehicles depending on the application. Please make sure you verify if your vehicle is compatible with adding additional switches since there are many vehicles out in the industry with different set ups. Also check with a Mobile audio and electronics professional to make sure you are getting the correct installation for your vehicle. (CONTACT US IF NOT SURE IF IT FITS YOUR VEHICLE BEFORE YOU BUY)

Custom Laser-Etched Rocker Switches is a Part of The Switch Masters

]]>