Accessories – The Switch Masters https://theswitchmasters.com Rocker, Push & Custom Switches Fri, 19 Apr 2024 18:38:20 +0000 en hourly 1 https://wordpress.org/?v=6.5.4 2 Push Switch Panel for Toyota Tacoma 2016-2022 https://theswitchmasters.com/product/2-push-switch-panel-for-toyota-tacoma-2016-2022/ Wed, 30 Mar 2022 13:09:00 +0000 https://theswitchmasters.com/?post_type=product&p=91238 *. The panel mounts to the existing cubby hole opening to the left of the steering wheel on the 2016-2022 Toyota Tacoma.

 

]]> 2 Push Switch Panel for Toyota Tacoma 2016-2022 allows you to run up to 2 OEM style switches*. The panel mounts to the existing cubby hole opening to the left of the steering wheel on the 2016-2022 Toyota Tacoma (use OEM screws that hold cubby hole to the vehicle). This panel is made out of heavy duty ABS Plastic for years of service, will not rust like the competition.

*Switches are not included.

This plate is as easy as 3 steps to get you an additional 2 TOYOTA PUSH SWICTHES.

Step 1: Pop out the trim by simply using a pry tool to get the clips off, the entire front plate will come out.

Step 2: Remove four corner screws that are holding the cubby to the front cover.

Step 3: Align the Push Switch Panel for Toyota Tacoma 2016-2020, using the same screws you removed from the cubby attached to the front cover.

FEATURES:

• Made out of lightweight, durable long lasting ABS Plastic
• Provide a clean and organized place to add OEM push switches
• No cutting or drilling required
• Will not rust or bend like the competition
• No additional parts need it for install (use OEM screws)
• TOYOTA PUSH SWITCHES NOT INCLUDED

2 Push Switch Panel for Toyota Tacoma 2016-2022 is a product of The Switch Masters

]]> Daisy Chain Harness for Toyota “Push Style” Switches (Large & Small) https://theswitchmasters.com/product/daisy-chain-harness-for-toyota-push-style-switches/ Tue, 15 Mar 2022 13:42:00 +0000 https://theswitchmasters.com/?post_type=product&p=91021 Daisy Chain Harness for Toyota “Push Style” Switches (Large & Small) allows you to expand the illumination to an additional switch or switches, you can add up to 6 daisy chain that will securely give you illumination for up to 7 switches, which is the maximum amount of switches supported by the system.

 

NOTE: The Daisy Chain Harness does not work on the DUAL PUSH SWITCH for Toyota (Large & Small)

 

How does it work?

Simply plug the Daisy Chain Harness into the intended connector, attach the green connector to your new switch, and finish the install by wiring the remaining 2 wires following the switch wiring diagram (out to the accessory relay & to a 12V source)

 

 

Package Included:

  • 1 x Daisy Chain Harness

 

Daisy Chain Harness for Toyota “Push Style” Switches (Large & Small) is a The Switch Masters product

]]> Universal 6 Gang LED Touch Screen Panel with Sealed Control Box, Wiring Harness and Label Stickers for Trucks, Jeeps, ATV/UTV, Cars, Marine Boats, RV (12/24V) https://theswitchmasters.com/product/universal-6-gang-led-touch-screen-panel/ Thu, 16 Sep 2021 17:29:00 +0000 https://theswitchmasters.com/?post_type=product&p=91720 Universal 6 Gang LED Touch Screen Panel is all in one design, no need to buy extra parts. Touch Screen Panel + Circuit Control Box + Cable + Self-Adhesive Label Stickers + Wiring Harness + Screw Sets.

The switch panel can control 6 kinds of led light bar or accessories at the same time under 12-24 Volts. Adopt capacitive sensing technology with blue indicator light display, the switch panel has the features of high sensitivity, stability and strong anti-interference ability.

Our 60 exclusive custom Self-Adhesive Label Stickers included allow you to use the panel with Off Road or Marine accessories, giving them greater possibilities and uses in different vehicles or vessels.

Easy installation: Plug & play wiring harness. Labels attach easily, space saving and time saving.

Application: Perfectly suitable for off road, Jeeps, powersports, marine boats, yacht, trailers, bus, RV, etc.

Installation Guide:

  1. Cut one hole on the dashboard.
  2. Connect touch screen panel with control box by using the provided transmission cable.
  3. Connect the device or application positive to the pin.

Package Included:

  • 1 x 6 gang touch screen panel
  • 1 x Sealed control box
  • 1 x 15-PIN transmission cable
  • 1 x 3M double sided tape
  • 60 x label stickers
  • 2 x Input wire
  • 6 x Output wire
  • 2 x M4*12 Stainless steel screws
  • 4 x M4*45 Stainless steel screws

Specifications:

  • Input Voltage: DC 12V-24V
  • Output: DC 12V 10A / 24V 10A
  • Waterproof rating: IP67
  • Reverse polarity protection
  • Overload protection
  • Touch screen panel dimensions: 3.15” x 3.94” x 0.39” (80x100x10mm)
  • Sealed control box dimensions: 3.35” x 5.31” x 1.18” (85x135x30mm)
  • Hole Size: 1.97” X 0.79” (50x20mm)

Universal 6 Gang LED Touch Screen Panel is a The Switch Masters product

]]> 12V 20/30 Amp Relay with 5 Pin Harness https://theswitchmasters.com/product/12v-20-30-amp-relay-with-5-pin-harness/ Sat, 22 Feb 2020 10:42:00 +0000 https://theswitchmasters.com/?post_type=product&p=40175 12V 20/30 Amp Relay with 5 Pin Harness feature a single pole, double throw, 5-terminal design with a resistor for maximum voltage spike protection.

 

]]> 12V 20/30 Amp Relay with 5 Pin Harness feature a single pole, double throw, 5-terminal design with a resistor for maximum voltage spike protection. They include a 12 V, 20/30 amp plastic relay, a mounting bracket, and a 5-pin wiring harness with a connector for a complete installation.

FEATURES:

• Amperage Rating: 20/30 amps
• Volts: 12V
• Terminal Type: Spade
• Locking Relay Socket With 12 Inch Lead Wire

KIT CONTAINS:

• 1 x 12 V DC relay and harness

Easy to mount – No instructions were included – You do need to know a little about electrical. For your and others’ safety, let professional technicians to install the equipment.

12V 20/30 Amp Relay with 5 Pin Harness is a product of The Switch Masters

]]> Marine Grade Waterproof 12V 40 Amp Relay with 5 Pin Harness https://theswitchmasters.com/product/marine-grade-waterproof-12v-40-amp-relay-with-5-pin-harness/ Thu, 20 Feb 2020 11:01:00 +0000 https://theswitchmasters.com/?post_type=product&p=40149 Marine Grade Waterproof 12V 40 Amp Relay with 5 Pin Harness feature a single pole, double throw, 5-terminal design with a resistor for maximum voltage spike protection.

 

]]> Marine Grade Waterproof 12V 40 Amp Relay with 5 Pin Harness feature a single pole, double throw, 5-terminal design with a resistor for maximum voltage spike protection. They include a 12 V, 40 amp plastic relay, a mounting bracket, and a 5-pin wiring harness with a connector for a complete installation.

FEATURES:

• Waterproof construction
• Amperage Rating: 40 amps
• Volts: 12V
• Pole: Single
• Wires: 12/16GA
• Terminal Type: Spade
• Wiring Harness Included: Yes

Notes: Features special seal to prevent moisture, dirt and dust from getting in. Mounting bracket is included.

KIT CONTAINS:

• 1 x 12 V DC waterproof relay and harness

Easy to mount – No instructions were included – You do need to know a little about electrical. For your and others’ safety, let professional technicians to install the equipment.

Marine Grade Waterproof 12V 40 Amp Relay with 5 Pin Harness is a product of The Switch Masters

]]> Toyota Push Switch Blank Cover https://theswitchmasters.com/product/toyota-push-switch-blank-cover/ Wed, 19 Feb 2020 16:31:00 +0000 https://theswitchmasters.com/?post_type=product&p=40126  ]]> Toyota Push Switch Blank Cover fits perfectly onto a blank Toyota Push switch hole to cover it up in a finished way. Often used as a place holder for adding another switch later, or simply covering a spot where an unneeded switch was removed.

FITS THESE VEHICLES:

• Toyota FJ Cruiser 2007-ON
• Toyota Fortuner 2005-2014
• Toyota Hilux 2005-2014
• Toyota Tacoma 2005-2011
• Toyota Tacoma 2012-ON (Left Side ONLY)
• Toyota Highlander 2001-2007
• Toyota Tundra 2005-2006 (Center Console if equipped)
• Toyota 4Runner 2003-2009
• Toyota Prado 120 Series 2003-2009
• Toyota Land Cruiser 100 Series 1998-2007
• Toyota Land Cruiser 75, 76, 78 & 79 series

Toyota Push Switch Blank Cover is a product of The Switch Masters

]]> Toyota Small Push Switch Blank Cover https://theswitchmasters.com/product/toyota-small-push-switch-blank-cover/ Wed, 19 Feb 2020 15:53:00 +0000 https://theswitchmasters.com/?post_type=product&p=40111  ]]> Toyota Small Push Switch Blank Cover fits perfectly onto a blank Toyota Small Push switch hole to cover it up in a finished way. Often used as a place holder for adding another switch later, or simply covering a spot where an unneeded switch was removed.

FITS THESE VEHICLES:

• Toyota Tacoma 2012-ON (Center Console ONLY)
• Toyota Tundra 2007-ON
• Toyota 4Runner 2010-ON
• Toyota Land Cruiser Prado 150 Series 2010-2014
• Toyota Land Cruiser 200 Series 2008-2013
• Toyota Sequoia 2008-ON
• Toyota Corolla 2006-2013
• Toyota Highlander 2008-ON
• Toyota RAV4 2008-2012
• Toyota Yaris 2008
• Toyota Camry 2011-2014

Toyota Small Push Switch Blank Cover is a product of The Switch Masters

]]> 3 Push Switch Panel for Toyota Tacoma 2016-2022 https://theswitchmasters.com/product/3-push-switch-panel-for-toyota-tacoma-2016-2022/ Fri, 05 Jul 2019 12:14:00 +0000 https://theswitchmasters.com/?post_type=product&p=37388 *. The panel mounts to the existing cubby hole opening to the left of the steering wheel on the 2016-2022 Toyota Tacoma.

 

]]> 3 Push Switch Panel for Toyota Tacoma 2016-2022 allows you to run up to 3 OEM style switches*. The panel mounts to the existing cubby hole opening to the left of the steering wheel on the 2016-2022 Toyota Tacoma (use OEM screws that hold cubby hole to the vehicle). This panel is made out of heavy duty ABS Plastic for years of service, will not rust like the competition.

*Switches are not included.

This plate is as easy as 3 steps to get you an additional 3 TOYOTA PUSH SWICTHES.

Step 1: Pop out the trim by simply using a pry tool to get the clips off, the entire front plate will come out.

Step 2: Remove four corner screws that are holding the cubby to the front cover.

Step 3: Align the Push Switch Panel for Toyota Tacoma 2016-2020, using the same screws you removed from the cubby attached to the front cover.

FEATURES:

• Made out of lightweight, durable long lasting ABS Plastic
• Provide a clean and organized place to add OEM push switches
• No cutting or drilling required
• Will not rust or bend like the competition
• No additional parts need it for install (use OEM screws)
• TOYOTA PUSH SWITCHES NOT INCLUDED

3 Push Switch Panel for Toyota Tacoma 2016-2022 is a product of The Switch Masters

]]> Toyota Land Cruiser Never Get Stuck Lanyard https://theswitchmasters.com/product/toyota-land-cruiser-never-get-stuck-lanyard/ Tue, 17 May 2016 14:35:00 +0000 https://theswitchmasters.com/?post_type=product&p=19885 Toyota Land Cruiser Never Get Stuck Lanyard features a durable buckle and hook, both made in Black PVC and metal, the perfect accessory for hanging important items such as: ID tags, tickets or keys.

 

]]> Toyota Land Cruiser Never Get Stuck Lanyard features a durable buckle and hook, both made in Black PVC and metal, the perfect accessory for hanging important items such as: ID tags, tickets or keys. The lanyard can be detached for quick removal and comes in a red and gray design. This lanyard also features a neat silicon Toyota Vintage Logo badge and a printed quote “I MAY GET LOST, BUT I WILL NEVER GET STUCK”.span>

Toyota owners would love to follow…

Toyota Land Cruiser Never Get Stuck Lanyard is a Part of The Switch Masters

]]> Jeep Life is Simple Lanyard https://theswitchmasters.com/product/jeep-life-is-simple-lanyard/ Wed, 20 Apr 2016 14:56:00 +0000 https://theswitchmasters.com/?post_type=product&p=19837 Jeep LIFE IS SIMPLE Lanyard features a durable buckle and hook, both made in Black PVC and metal, the perfect accessory for hanging important items such as: ID tags, tickets or keys.

]]> Jeep Life is Simple Lanyard features a durable buckle and hook, both made in Black PVC and metal, the perfect accessory for hanging important items such as: ID tags, tickets or keys. The lanyard can be detached for quick removal and comes in a green and yellow design. This lanyard also features a neat silicon Trail Rated Logo badge and a printed quote “LIFE IS SIMPLE: SLEEP, EAT & JEEP”.

Jeep owners would love to follow…

Jeep Life is Simple Lanyard is a Part of The Switch Masters

]]>